SERVICES

Contact Us

Aerial Mapping

  • The project area is flown with ground control targets set.
  • The images are post processed 
  • The project is georeferenced to ground control targets.
  • A DSM is generated and any unwanted artifacts are removed. Ex. conveyors, buildings, equipment, contours on water, etc.
  • Orthorectified final image is created. 
  • Processed data is exported to AutoCAD Civil 3D and the final deliverable files are created and sent to the client for analysis.

Stockpile Quantities by Product

  • The stockpile area is flown with ground control targets set.
  • The images are post processed 
  • The project is georeferenced to ground control targets.
  • A DSM is generated and any stacking conveyors are removed.
  • Processed data is exported to AutoCAD Civil 3D where the stockpile volume is calculated. 
  • A final pdf report is submitted to the client. 

Mining Quantities Between Flight Dates

  • The mining area is flown before and after a specified area is mined, with ground control targets set.
  • The images are post processed 
  • The project is georeferenced to ground control targets.
  • A DSM is generated and any unwanted artifacts are removed.
  • Processed data is exported to AutoCAD Civil 3D where the two flight times are compared and a volume is calculated. 
  • A final pdf report is submitted to the client. 

Mine Planning, Reserve and Overburden Calcs

  • Project area is defined by the client and the best available existing ground is used. Ex. Drone, LiDAR
  • MSL elevation limits are defined by client.
  • Mine plan and requested quantities are calculated based on yearly plant or site throughput.
  • A final pdf report is submitted to the client.